Gotta’ have that funk!

If you feel like adding a little twang to your brew, try adding bugs!  This week the BeerSmith goes over Souring your homebrew.

Soured Beer in Homebrewing

The use of soured beer is an ancient technique used to add character to many beer styles. One of my personal favorites, the Irish Stout, often includes a small addition of soured wort. Sour beer dates back to the ancient times, as the discovery of beer likely occurred when someone left some wet grains out and they started fermenting. It has also been widely used in Belgian beers, where in many cases entire batches are left to sour in open vats, producing many sour styles such as Lambic and Flanders. Flanders brown is often made with blended sour and unsoured beer. I won’t cover Lambics in great detail here, as the methods used for Lambics vary considerably, but also often include blending soured wort with unsoured beer.

Brewing with sour beer at home involves taking a portion of the wort from your mash (or for extract brewers, a portion from the boil) and setting it aside and either adding souring yeasts such as Lactobacillus or letting it sour naturally.Personally I recommend getting some Lactobacillus culture such as Wyeast Labs #4335 “Lactobacillus Delbrueckii” as natural yeasts and bacteria can often go awry. For Lambics, Wyeast #3112 “Brettanomyces Bruxellensis” or Brewtek’s “Brettanomyces Lambicus” are often used with other yeasts as part of the main fermentation or part of the fermentation. The spoiled wort is then pasteurized by heating it and added back into the original beer to give a slightly sour character to the beer.This will add character and a lactic sourness to the beer, which is desirable for many styles.

The Sour Mash Method

If you are brewing an all grain batch, a portion of the runnings from your mash tun should be collected and set aside in a separate container.For something like an Irish Stout, I typically would set aside 1/2 quarts of wort from the middle runnings of the mash and set it aside for a 5 gallon batch. A good rule of thumb is that your spoiled wort should only make up about 3-4% of your total finished volume for stouts, and up to 25% of your volume for a Flanders Brown Ale, though I recommend starting with less and blending to taste. If you use too much you will end up with excessively sour beer.

For extract brewers, you can draw a portion of the wort near the beginning of the boil, ideally after you add your extract but before adding the hops, as hops themselves can have an antibiotic effect.

Once you have collected your wort, simply set it aside in a small closed container and continue to brew the remainder of your batch in the normal way.For the sour portion I prefer to simply add a small amount of Lactobacillus bacteria strain to the wort, apply an airlock, and let it sour in a cool, dark location.

The soured wort will quickly get a sour smell, and likely a disgusting film over the top.After a few days it should be thoroughly infested and largely fermented.At this point, carefully siphon or skim and pour the liquid, attempting to leave as much of the scum and sediment behind as possible.

Place the soured wort in a pan and heat it to 170F and hold it there for at least 30 minutes.This will pasteurize the soured wort to kill off the bacteria and yeast without destroying the sour lactic acid flavor you want in your beer.

Rapidly cool the sour portion, being careful at this point to handle it with sanitized equipment.Siphon or very gently pour the soured wort into your already fermenting main batch, and continue fermenting, aging and bottling the beer as you normally would.

Done properly, the sour mash method will produce a slight, but not overly pronounced sour edge to your beer.In styles such as classic Irish Stout, the sourness helps to enhance the overall flavor mix of stout roast barley and English hops. For Flanders, this provides the classic sour twang. This technique can also be used to sour some more sophisticated Belgian styles, though brewing a complex beast like a Lambic is beyond the scope of this particular article.

I hope you enjoy adding a bit of sour twang to your next homebrew.

Comments are closed.